The principle of operation paroutilizatora Paroutilizator is not a direct analog of steam-jet apparatus psa. The main purpose of paroutilizatora, of course, is the same as that of the psa – this is hot water with steam. But technical implementation process of mixing steam and water is fundamentally different. To explain the essence of the difference must stop at the design of both devices. Paroutilizator consists of two main components – condensing the water column and ejector. In condensing the column fed steam and water.
In the column of water is dispersed into small droplets by spray and vapor condenses. At the bottom of the column accumulates superheated water mixed with steam condensate. From the column resulting mixture is extracted water-jet ejector. Working with water fed and the ejector and the condensing column, a water network. The bulk Water is supplied to the ejector, and a smaller part of the water – to the condensing column. Here is an overview and all the know-how, which is incorporated into the design paroutilizatora.
Design features of psa Now that regards the construction our apparatus. We use a different approach to design the apparatus, as well as to understand the expression “know-how. From our point of view of know-how “is not inherent in the design of the device and is contained in the method of calculating the correct jet apparatus, that is, is knowledge and understanding of the processes by mixing steam and water. The design of our apparatus to mind easier than construction paroutilizatora, but the description of the process is much complicated.